Cinterion
®
LTE Terminals Hardware Interface Description
1.3 Regulatory and Type Approval Information
19
ELSxT_HID_v04 2018-09-04
Confidential / Preliminary
Page 14 of 102
Draft ETSI EN 301 489-52
V1.1.0
Electromagnetic Compatibility (EMC) standard for radio equipment and
services; Part 52: Specific conditions for Cellular Communication Mobile
and portable (UE) radio and ancillary equipment; Harmonized Standard
covering the essential requirements of article 3.1(b) of Directive 2014/53/
EU
ETSI EN 301 908-1
V11.1.1
IMT cellular networks; Harmonized Standard covering the essential
requirements of article 3.2 of the Directive 2014/53/EU; Part 1:
Introduction and common requirements
ETSI EN 301 908-2
V11.1.2
IMT cellular networks; Harmonized Standard covering the essential
requirements of article 3.2 of the Directive 2014/53/EU; Part 2: CDMA
Direct Spread (UTRA FDD) User Equipment (UE)
EN 62311-2008 Assessment of electronic and electrical equipment related to human expo-
sure restrictions for electromagnetic fields (0 Hz - 300 GHz)
EN 60950-1:2006/
A11:2009+A1:2010+
A12:2011+A2:2013
Safety of information technology equipment
Table 6: Standards of Japanese type approval
ELS31T-J will be certified to meet the requirements of the Japanese "Telecommunications Business
Law" and "Ordinance Concerning Technical Regulations Conformity Certification of Specified Radio
Equipment" as well as the requirements of the Japanese "Radio Law" and "Ordinance Concerning
Technical Conditions Compliance Approval and Certification of the Type for Terminal Equipment".
For more information see Section 6.1.
Table 7: Requirements of quality
IEC 60068 Environmental testing
DIN EN 60529 IP codes. The LTE Terminals comply with IP40.
Table 5: Standards of European type approval
To Next Page
Loading...
