Gemu 1436 cPos - General safety information; Safety notes

4 / 66
1436 cPos
1 General safety information
Please read the following notes carefully and observe them.
1.1 General information
Important requirements to ensure the perfect function of this
GEMÜ 1436 cPos:
● Correct transport and storage
● Installation and commissioning by trained personnel
● Operation according to these operating instructions
● Recommended maintenance
The GEMÜ 1436 cPos must be used in accordance with
these directions. All information in these operating
instructions regarding operation, servicing and
maintenance must be observed and applied. If the
information is not observed, the operator's guarantee
rights and the manufacturer's legal liability cease.
The manufacturer shall undertake no responsibility
for the GEMÜ 1436 cPos if these safety notes are not
observed.
Therefore, you must observe:
● the contents of these operating instructions
● the relevant safety regulations for the installation and
operation of electrical systems
● that this device must not be used in potentially explosive
areas.
The regulations, standards and guidelines named in these
operating instructions are only applicable in Germany. If
the GEMÜ 1436 cPos is used in other countries, the local
applicable regulations must be observed. When dealing with
harmonised European norms, standards and guidelines, these
apply within the Single European Market. The operator must
also adhere to national rules and guidelines, if applicable.
The descriptions and instructions in these operating
instructions refer to the standard version.
All rights including copyright and industrial property
rights are expressly reserved.
The safety information does not take into account:
w Unexpected incidents and events, which may occur during
installation, operation and servicing.
w Local safety regulations which must be adhered to by the
operator and by any additional installation personnel.
In cases of uncertainty:
w Consult the nearest GEMÜ sales oce.
1.2 Explanation of symbols and signs
Important information is identied in these operating
instructions by the following symbols:
DANGER
This symbol indicates danger. There is danger to
life or health of personsand/or considerable
material damage can occur, if the instructions
given here are not followed.
Slightbodilyinjury and damage to property
can occur, if the safety information given in
connection with this symbol is not observed.
This symbol indicates notices which
give important information regarding your
GEMÜ 1436 cPos.
1.3 Safetynotes
DANGER
● Only qualied and trained personnel should
assemble, electrically connect and commission
the GEMÜ 1436 cPos.
Use qualied personnel for operation,
servicing, inspection and assembly. The areas
of responsibility, the monitoring of personnel
and their competence areas should be dened
precisely by the operator. Train personnel with
insucient knowledge or, if necessary, have
them trained by the manufacturer / supplier on
order of the operator. Ensure that all members of
personnel understand the safety instructions.
● Ensure that the power supply equipment is
electrically safe.
● Ensure that the electrical values are correct.
DANGER
Exhaust air and cycle duties generate noise!
P Hearing damage.
● Wear hearing protection.
If the safety information is disregarded then persons, the
environment and the GEMÜ 1436 cPos may be endangered.
Furthermore, failure to observe the safety information may lead
to a complete loss of claims rights.
Adhere to legal regulations.