Gemu 1436 cPos - Set Values for the Freely Programmable; 18 Disposal; 19 Returns; 20 Information

49 / 66
1436 cPos
17.2 Setvaluesforthefreelyprogrammablecharac-
teristic curve
Configuration
level
Display Characteristic curve point P1 P2 P3 P4 Factory settings
4SetCalibration Set W-free 0 % 0 %
10 % 10 %
20 % 20 %
30 % 30 %
40 % 40 %
50 % 50 %
60 % 60 %
70 % 70 %
80 % 80 %
90 % 90 %
100 % 100 %
18 Disposal
¬ All parts must be disposed of according to
relevant local or national disposal regulations /
environmental protection laws.
¬ Pay attention to adhered residual material and
gas diffusion from penetrated media.
19 Returns
¬ Clean the positioner.
¬ Request a goods return declaration form from GEMÜ.
¬ Returns must be made with a completed declaration of
return.
If not completed, GEMÜ cannot process
w credits or
w repair work
but will dispose of the goods at the operator’s expense.
Note for returns:
Legal regulations for the protection of the environment
and personnel require that the completed and signed
goods return declaration is included with the dispatch
documents. Returned goods can be processed only
when this declaration is completed.
20 Information
Note on staff training:
Please contact us at the address on the last page for
staff training information.
Should there be any doubts or misunderstandings in the
preceding text, the German version of this document is the
authoritative document