Owner’s Manual for Power Zone Gateway on PZ 410 9
Installation and Operation
Top Banner
Figure 3-3. Top Banner Features
(A) Keyswitch Status
A red LED indicates the key is in the OFF position. A
green LED indicates the key is in the AUTOMATIC posi-
tion. An orange LED indicates the key is in the MANUAL
position.
(B) Communications Health
A blinking green LED indicates the controller is respond-
ing to Modbus requests. A blinking red LED indicates the
Main Controller is not responding to requests.
(C) Generator Name
Displays the name of the generator. The user can give
the generator an easy to understand name such as
“East”, “West”, or “Number 1”. See Figure 3-4. To name
the generator, go to Setup → Communications → Device
Manager screen, press the Edit button (E) and enter the
Friendly Name.
(D) Run Hours
Displays the total number of hours the generator has
been run.
Figure 3-4. Edit Generator Name
A B
C
D
007516
014623
E
To Next Page
Loading...
