Owner’s Manual for Power Zone Gateway on PZ 410 17
Installation and Operation
Figure 3-28. Ground Fault Indication (GFI)
Calendars
See Figure 3-29. The Calendars screen displays date
and time related functions.
Figure 3-29. Calendars
Set Date/Time
This is covered in Date/Time.
Exercise Setup
See Figure 3-30. This screen is used to setup Single
generator exercise. Select how often the exercise should
run (weekly or biweekly) and which day of the week. Mul-
tiple days can be selected. Select the start week of Bi-
Weekly (this week or next week). Set Time of the Day
and Duration in 24 hour format.
Figure 3-30. Exercise Setup
Communications
The Communications screens are used to configure the
settings for the ethernet port used for connecting to an
external ethernet network, view the modules connected
on the internal Modbus RTU network through the Device
Manager, configure remote modbus access to the Gate-
way, configure SNMP, view and configure the Gateway
Internal serial (RS-485, RS-232) interfaces, configure IP
Whitelisting, and configure Email server and configure
distribution list for receiving alarm logs.
015126
014620
014619
To Next Page
Loading...
