Model S4000T
7
NOTE - The system’s full two-year warranty will be voided if customer personnel or
third parties damage the system during repair attempts.
Sensor heads exposed to the elements may require the accessory mounting threads
to be lubricated. Grease must not be used. As an alternate, PTFE (teflon) tape may
be used on sensor accessory threads.
NOTE - Do not use any material or substance on threads that contact the sensor
housing.
The removal of particulate matter from sensor accessories may be done through the
use of an appropriate halogen-free solvent. Water or Ethanol are examples of
suitable solvents. The accessories should be thoroughly dried, with compressed air if
necessary, before refitting to the sensor body.
To Next Page
Loading...
Need help?
General
