Model S4000T
24
5.0 Maintenance
5.1 General Maintenance
WARNING - Disconnect or inhibit external devices such as Trip Amplifiers, PLC’s, or
DCS systems before performing any maintenance.
European Union (EU) Approved Applications: The following grease compound is
recommended for use: PBC Polybutylcuprysil, (or equivalent), which has BASEEFA
Health & Safety Executive component approval No. 1051U for use as a jointing
compound on flameproof electrical enclosures. This is available from General
Monitors. The neoprene rubber gasket should also be lubricated with Type P80
lubricant available from General Monitors (P/N 610-010).
5.2 Storage
The Model S4000T H
2
S Gas Detector should be stored in a clean, dry area and
within the temperature and humidity ranges quoted in the Appendix under
Environmental Specifications.
Insert red dust caps into any vacant cable entry holes.
To Next Page
Loading...
Need help?
General
