Generic XOR 125 - BRAKE CALIPER REMOVAL AND DISASSEMBLY; Caliper Removal Steps

69
·Remove the brake pads.
CAUTION:
Replace the brake pads as a set,otherwise braking performance will be adversely
affected.
Reassemble and remount the calliper.
CALIPER REMOVAL AND DISASSEMBLY
Remove the brake hose and catch the brake fluid in a suitable receptacle.
CAUTION:
Nevere re-use the brake fluid left over from the last servicing and stored for
long periods.
·Remove the calliper.
·Remove the brake pads.
·Remove the spring and pad holder.
·Place a rag over the piston to prevent popping up.Froce out the piston with a air gun.
CAUTION:
Do not use high pressure air to prevent piston damage.
·Remove the dust seal  and piston seal .