Generic XOR 125 User Manual

40
PISTON INSTALLATION
Install the piston with it’s “IN“ mark on the intake valve
side.
Install the piston pin with new pin clips.
Do not align the piston pin clip end gap with the piston
cutout.
NOTE: Do not allow the clip to fall into the
crankcase.
CYLINDER INSTALLATION
Clean any gasket material from the crankcase surface.
NOTE: Be careful not to damage the gasket surface.
Install the dowel pins and a new gasket.

Generic XOR 125 Specifications

General

Brand	Generic
Model	XOR 125
Category	Scooter
Language	English