Genesis G90 - Detour

111
Detour
Thismenuisusedtoselectandeditdetoursbyselectingastart
andendpointalongtheroute.
1. Press →[Navigation]→[Route]→[Detour].
2. Press[StartingPoint].
3. Setthestartingpointandendpointofthedetourarea.
4. Press[Detour].
5. Selectthedesiredroute.
•
[Current]:Usesthecurrentrouteforrouteguidance.
•
[Detour]:Usesthedetourrouteforrouteguidance.
Navigation