Genesis G90 - Playing USB Images; Displaying USB Image Control Panel; Changing Media Mode; Playing the Previous;Next File

76
Playing USB Images
1. Connect the USB device to the USB connector terminal.
Once the USB device is connected, USB mode will automati-
cally start.
2. To disconnect USB devices safely, first select another feature
before disconnecting the USB device.
Information
• If the USB is already connected and you wish to play USB images from
a different mode, press the key on the controller then press
[Media]→[USBImage].
Displaying USB Image Control Panel
In the play screen, press the controller to display the Control
panel.
Changing Media Mode
In the play screen, press the key on the controller to
display the Mode Selection screen.
Playing the Previous/Next File
The previous/next file can be played.
• Use the controller to press [ ].
Zoom In/Out
In the play screen, turn the controller to zoom in/out the image
or push up/down/left/right on the controller to move across the
image.
Slide Show
This feature allows you to view images in sequential order.
For more information on using this feature, refer to “Jukebox
Image”onpage67.
Slide Show Settings
The image slide show interval can be set to 5 seconds, 7
seconds, or 10 seconds.
For more information on using this feature, refer to “Jukebox
Image”onpage67.
USB Image