Genesis G90 - Aux; AUX Mode; Sound Settings

81
AUX Mode
AUXmodecanbeusedonlywhenanexternalaudioplayeris
connected and currently operating.
UseanAUXconnectorcabletoconnecttheexternaldeviceto
theAUXterminal.
Oncetheexternaldeviceisconnected,AUXmodewillautomatically
start. Once the connector cable is disconnected, the previous mode
will be restored.
Information
• IftheexternaldeviceisconnectedandyouwishtoplayAUXmodefroma
different mode, press the
key and press [Media]→[AUX].
• ConnectinganAUXconnectorjackwithoutconnectinganexternal
devicewillconvertthesystemtoAUXmode,butonlyoutputnoise.
WhenAUXmodeisnotinuse,makesuretoalsoremovetheconnec-
torjack.
Sound Settings
Press →[Sound Settings].
To learn more, refer to the "Sound Settings" section on page 146.
AUX