7-185
07
Remote Operation
Operating order
Remote Operation function operates in
the following order:
1.
Getting ready to remotely move
forward and backward
2.
Remotely moving forward and
backward
There are two ways to operate Remote
Operation function.
OJWEV071155 OJWEV071155
Method (1) Using the function with
vehicle off
(1)
Within a certain range from the
vehicle press the door lock (
) button
on the smart key and lock all doors.
(2)
Press and hold the Remote Start
button (
) within 4 seconds until the
vehicle starts.
• For more details on remotely
starting the vehicle, refer to
"Remote start (if equipped)" section
in chapter 6.
OJWEV071156N OJWEV071156N
OJWEV071277LOJWEV071277L
Method (2) Using the function with
vehicle on
(1) Park the vehicle in front of the space
where you want to use Remote
Operation function, and shift the gear
to P (Park).
(2)
Press and hold the Parking/View
(
) button to turn on Smart Parking
Assist. A message ‘Remote Parking
Instructions’ will appear on the
infotainment system screen.
(3)
Get out of the vehicle with the smart
key and close all doors.
To Next Page
Loading...
