7-186
Driver assistance system
• 'Agree' must be selected on the
infotainment system screen and the
infotainment system has to operate
properly to use Remote Operation
function.
•
Method (2) can be used after the
vehicle has been driven above 5
km/h (3 mph).
•
If the function is turned on again
after parallel parking is completed
by Remote Smart Parking Assist,
Remote Operation function can be
used with Method (2).
•
Check that all smart keys are
outside the vehicle when using
Remote Operation function.
OJWEV071157 OJWEV071157
(1) Press and hold one of the Forward
(
) or Backward ( ) button on the
smart key. Remote Smart Parking
Assist will automatically control the
steering wheel, vehicle speed and
gearshift. The vehicle will move in the
direction of the button pressed.
(2)
While Remote Operation function
is operating, if you do not hold
down the Forward (
) or Backward
(
) button, the vehicle will stop
and function control will pause. The
function will start operating again
when the button is pressed and held
again.
(3)
When the vehicle reaches the target
location, release the smart key
Forward or Backward button.
(4)
When the driver gets in the vehicle
with the smart key, a message will
appear informing the driver Remote
Operation function is complete on
the infotainment system screen and
the vehicle will remain on.
In addition, when the Remote Start
(
) button is pressed on the smart
key from outside the vehicle, a
message will appear informing the
driver Remote Operation function is
complete and the vehicle will turn off.
To Next Page
Loading...
