28142 Rev 15 REPLACEMENT PARTS LIST
Gentherm Global Power Technologies Page 76
See Section 4.1.3 for detailed diagrams of the burner assembly.
Part No.
Part Description Replacement Notes
27902 Standard burner assembly
For replacement of the entire
5220-TEG burner assembly
(Excludes the air screen
assembly)
5375 Venturi assembly
To be replaced if damage
observed during burner
inspection (Section 10.1)
5605 Ceramic burner-screen insulating spacer
To be replaced if damage
observed during burner
inspection
5390 Burner screen assembly
To be replaced if damage
observed during burner
inspection
27900 Air shutter, profiled
To be replaced if damage
observed during burner
inspection
5586 Air screen assembly
To be replaced if damage
observed during burner
inspection
(*Not included in 27902 burner)
See Section 4.2 and 4.3 for detailed information on the 24V Limiter/Converter assembly and
the 12V Limiter assembly, respectively.
Part No.
Part Description Replacement Notes
68215
29475
24-Volt Limiter / Converter assembly
12-Volt Limiter assembly
To be replaced if 24V L/C or 12V
Limiter are found to be faulty
(Section 10.3)
27907 SI Power Converter Board (FPCI Board)
To both be replaced if SI system
found faulty (Section 10.2)
63096
Spark Ignition Module (Channel Products
Gasliter)
57869
57216
Replacement 24-Volt Surge Protection
Device
Replacement 12-Volt Surge Protection
Device
SPD’s come on all Cathodic
Protection 5220-TEGs and may
need replacing after severe
lightning strikes
To Next Page
Loading...