Key Features
This section contains a general description of Gemini’s systems. For more information
please see Appendix section.
Magnetic Compass
Built-in magnetic compass allows accurately keep an orientation.
GNSS Positioning
Built-in high-precision GNSS receiver is supports dual frequency GPS/GLONASS
L1/L2 tracking. GNSS tracking allows you to get the coordinates of the camera centers
in PPK mode with an 1.5 cm accuracy even at a long distance from the GNSS base
unit.
Automatic UAV control
RC control is not needed for a flight. You can pre-create the flight task and load it into
UAV memory directly before takeoff. The flight process control is automatic. The UAV
operator can monitor the flight process using a laptop and can edit the flight task in a
real time.
Precise Positioning System
The UAV is equipped with ultrasonic sensors and positioning camera that detect the
UAV position in the air. The UAV autopilot automaticly corrects speed and direction
during takeoff and landing by sensors data.
11
To Next Page
Loading...
