Parts And Operating Modes
Battery charger parts
The battery charger can work in two operating modes: Charge and Storage.
Charge mode allows to charge up to 2 flight batteries.
If 2 batteries are installed, battery with a large charge level will start charge first.
Storage mode allows to automatically charge or discharge batteries up to 60% of
batteries capacity, that needed to store the batteries for 14 days or more.
Use the mode switcher to switch mode.
A short red flashing of the charger’s LEDs indicates, that the charger is broken.
In this case, unplug power cable from outlet, wait when LEDs turn off and then turn the
charger on again.
If the charger is still not working, please, contact our technical support.
23
To Next Page
Loading...
