UAV Disassembly
1) Disable UAV in the same way as you turn it on (Press the battery control button
once, again, and hold until all LEDs are lights first time).
2) Attach the lens cap to the camera lens.
3) Press battery instaling buttons and eject remove it from UAV battery slot.
Always turn UAV off before removing the battery!
4) Hold the motor’s rotor and remove each propeller by rotating it in the opposite
direction to what is indicated on the propeller’s icon.. Place propellers in the
transport case.
5) Eject SD card from SD card slot.
50
To Next Page
Loading...
