Charge Mode
Follow these steps to charge batteries:
• Connect the power cable to the battery charger.
• Connect the battery charger to a power outlet (100 — 240 V, ∼50/60 Hz).
• Switch the mode switcher in Charge position.
• Install flight batteries in battery charger’s slots.
The charging process will start. Battery’s LEDs will shows a current charge level.
The charger’s LED indicator will change color from red to green at the battery charge
level 95%. Charger LEDs will be turned off at 100 %.
Charging time of discharged battery up to 95% at the temperature +25°С is ∼75 minutes.
Charging time to 100% is ∼105 minutes. Battery cells will be balanced at the last 5%.
Storage Mode
If you do not plan use batteries for next 14 days or more, switch them in storage mode.
Switch the mode switcher to Storage position.
Make sure that charger’s LEDs are flashing green and insert batteries into ports of
the charger.
The charger LEDs should start pulsing red smoothly.
The battery charger will automatically charge or discharge batteries up to 60% capacity,
which is required to store them correctly for 14 days or more.
24
To Next Page
Loading...
