90
9.2 Accessing the Live View
Access or configure your camera according to the camera type and its
firmware version:
Camera Type &
Firmware Version
Default Connection Type
• GV-IPCAM H.264 with
firmware V1.07 or
later (except
GV-BX110D, BL110D,
GV-MFD110,
GV-PT110D,
GV-PTZ010D)
DHCP
An unused IP address is automatically
assigned by the DHCP server to the
camera when the camera is connected to
the network. Refer to 9.2.1 Checking the
Dynamic IP Address to look up the IP
address.
However, if the camera is installed in a LAN
without DHCP server, access the camera
by its default IP address 192.168.0.10 and
see 9.2.2 Configuring the IP Address for
more detail.
• GV-IPCAM H.264 with
firmware V1.06 or
earlier
• GV-BX110D
• GV-BL110D
• GV-MFD110
• GV-PT110D
• GV-PTZ010D
Static
The default IP address 192.168.0.10 will be
automatically assigned when the camera is
connected to the network.
To avoid IP conflict with other GeoVision IP
devices, it is advisable to re-assign a
different IP address. See 9.2.2
Configuring the IP Address for more
detail.
To Next Page
Loading...
Need help?
General
