8
1.3.2 Infrared Illuminators (GV-IR LED / GV-IR LED T2)
1. Connect the infrared illuminator to the terminal block on the camera.
See
I/O Terminal Block, Box Camera Chapter, GV-IPCam H.264
User’s Manua
l on the software CD, or GV-IR LED User’s Manual.
2. Access the Web interface of the camera.
3. Select
Video and Motion, select Video Settings, select Streaming 1
and set the
IR Check Function option to be Trigger by Input (for
GV-IR LED) or
Trigger IR by D/N (for GV-IR LED T2).
GV-IR LED