GeoVision GV-FD120D Quick Start Guide

74
15. Place the housing cover on the camera body with the GeoVision logo
pointing toward the front of the camera.
6.3.3 Wall-Surface Mount
1. Follow step 2 in the Hard-Ceiling Mount section to remove the housing
cover and take out the camera body.
2. Paste the supplied sticker onto a desired location on the wall. Drill the
three red dots, and the ellipse mark only if you wish to run the wires
into the wall.

GeoVision GV-FD120D Specifications

General

Brand	GeoVision
Model	GV-FD120D
Category	Security Camera
Language	English