98
9.3 Adjusting Image Clarity
You can adjust the image clarity using the GV-IP Device Utility. Make sure
that you have connected your GV-IPCAM H.264 to the network and install
the GV-IP Device Utility program under the same LAN.
Note: This feature is only supported by Box Camera, IR Arctic Box
Camera, GV-MFD110, Bullet Camera, Vandal Proof IP Dome, and Fixed
IP Dome.
1. Make sure you have installed the GV-IP Device Utility program
included on the GV-IPCAM H.264 Software CD.
2. On the GV-IP Utility window, click the
button to search for the IP
devices connected in the same LAN. Click the IP Address of the
camera you desire. A drop-down list appears.
3. Select Focus Value. The Login dialog box appears.
To Next Page
Loading...
Need help?
General
