IR Arctic Box Camera
17
2
2.3 Installation
The IR Arctic Box Camera is designed for outdoor use.
1. Mark the installation site and drill four holes for screw anchors.
2. Insert the supplied screw anchors.
3. Secure the camera to the wall using the supplied washers and screws.
4. Connect the camera to the network and supply power via the PoE
cable. See 2.4 Connecting the Camera.
5. Access the live view. See 9.2 Accessing the Live View in the Quick
Start Guide.
6. Based on the live view, adjust the angle of the camera. Loosen the
indicated screw with the supplied big torx wrench and adjust the joint.
To Next Page
Loading...
Need help?
General
