20
8. Replace the silica gel bag. Paste the sticker to the front side of the
silica gel bag. Press the sticker several times to make sure it adheres
properly and paste the silica gel bag to the indicated place.
Important:
1. Be sure that the new silica gel bag is concealed in the camera
housing within 2 minutes of exposing to open air.
2. To prevent the lens from fogging up, you must replace the silica gel
bag every time you open the camera. The gel bag loses its
effectiveness when the dry camera is opened.
9. Refer to step 7 to plug the connectors and secure the camera cover.
To Next Page
Loading...
Need help?
General
