GeoVision GV-MFD320 Quick Start Guide

68
7.4 Connecting the Camera
1
2
1. Connect power using one of the following methods:
 Plug the power adapter to the 12V terminal block. The power
adapter is an optional device. For detail, see Options, GV-IPCAM
H.264 Hardware Manual for Target Mini Fixed Rugged Dome on
the Software DVD.
 Use the Power over Ethernet (PoE) function and the power will be
provided over the network cable.
The power and status LEDs shall turn on (green).
2. Use a standard network cable to connect the camera to your network.
3. You are ready to access the live view, adjust the image clarity and
configure the basics. See 21. Accessing the Camera in the Quick Start
Guide.

GeoVision GV-MFD320 Specifications

General

Brand	GeoVision
Model	GV-MFD320
Category	Security Camera
Language	English