Restoring to Default Settings
24
Mini Fixed Rugged Dome
1. Keep the power and network cables connected to the camera.
2. Press and hold the default button.
Status LED
Default button
3. Release the default button when the status LED blinks. This shall
take about 8 seconds.
4. When the status LED fades, the process of loading default settings is
completed and the camera reboots automatically.
IR Arctic Box Camera
Note the following procedure is only applicable to GV-BX2510-E / 5310-E.
To restore default settings of other IR Arctic Box Cameras, access the load
default function from its Web interface. For details, see Tools, Administrator
Mode, Chapter 4, GV-IPCam H.264 Firmware Manual.
1. Keep the power and network cables (or PoE) connected to the
camera.
2. Press and hold the default button.
237
To Next Page
Loading...
Need help?
General
