GeoVision GV-MFD320 Quick Start Guide

Target Vandal Proof IP Dome
1. Keep the power and network cables (or PoE) connected to the
camera.
2. Press and hold the default button for about 8 seconds.
3. Release the default button when the status LED blinks.
Status LED
Default
4. When the status LED fades, the process of loading default settings is
completed and the camera reboots automatically.
242

GeoVision GV-MFD320 Specifications

General

Brand	GeoVision
Model	GV-MFD320
Category	Security Camera
Language	English