GeoVision GV-MFD320 Quick Start Guide

13.4 Connecting the Camera
Connect your Vandal Proof IP Dome to power, network and other wires
needed.
13.4.1 Connecting the Power Cable
There are two ways to supply power to the camera:
 Use a Power over Ethernet (PoE) adapter to connect the camera to the
network, and the power will be provided at the same time.
 Plug the power adapter to the terminal block by inserting the striped wire
to the right pin (-) and the black wire to the left pin (+).
146

GeoVision GV-MFD320 Specifications

General

Brand	GeoVision
Model	GV-MFD320
Category	Security Camera
Language	English