Ultra Bullet Camera
1. Keep the power and network cables (or PoE) connected to the
camera.
2. Press and hold the default button.
Default button
3. Release the default button when the status LED blinks. This shall
take about 8 seconds.
4. When the status LED fades, the process of loading default settings is
completed and the camera reboots automatically.
Target Bullet Camera
1. Keep the power and network cables (or PoE) connected to the
camera.
2. Loosen the camera’s cover.
3. Press and hold the default button for about 8 seconds.
240
To Next Page
Loading...
Need help?
General
