GeoVision GV-MFD320 Quick Start Guide

Restoring to Default Settings
24
Cube Camera
1. Keep the power and network cables connected to the camera.
2. Use a pin to press and hold the default button on the panel.
Status LED
Default button
3. Release the default button when status LED blinks. This shall
dvanced Cube Camera
ables connected to the camera.
the
ta
ke about 8 seconds.
4. When the status LED turns orange, the process of loading default
settings is completed and the camera is ready for use.
A
1. Keep the power and network c
2. Use a pin to press and hold the default button on the panel.
Status LED
Default button
3. Release the default but when the status LED blinks. This shall ton
take about 8 seconds.
245

GeoVision GV-MFD320 Specifications

General

Brand	GeoVision
Model	GV-MFD320
Category	Security Camera
Language	English