Gerber Edge User Manual

6 GERBER EDGE Owner’s Guide
To connect the GERBER EDGE to the GRAPHIX
ADVANTAGE
1. Use the printer cable to connect the GERBER EDGE to
GRAPHIX ADVANTAGE printer port LPT2.
2. Plug the power cord into the power cord receptacle.
3. Plug in and turn on the GERBER EDGE first, then the
GRAPHIX ADVANTAGE.
To add the GERBER EDGE to your GRAPHIX
ADVANTAGE
1. Double-click on the GSP Setup icon in the GRAPHIX
ADVANTAGE program group to open GSP Setup.
2. Click on Setup in the menu bar.
3. Click on Vinyl Printer. The Add or Delete Vinyl Printer(s) dialog
box appears.
4. In the Vinyl Printers list box, click on the GERBER EDGE.
5. In the Ports list box, click on LPT2.
6. Click on Add. The GERBER EDGE is added to the Installed
Vinyl Printers list box.
7. Click on Continue. The GERBER EDGE is added to the system
and you return to the GSP Setup menu.

Gerber Edge Specifications

General

Brand	Gerber
Model	Edge
Category	Printer
Language	English