Gerhardt S Series - Risk of Burns and Scalding

Safety and security
13
Observe the following safety instructions to avoid hazards from
electric current:
 Do not use a damaged power cord.
 Never plug the mains plug into the socket when it is wet or
touch it with wet hands.
 A damaged power cord may only be replaced by the
manufacturer, its technical service department or a similarly
qualified person.
 Do not open any firmly screwed covers from the housing of
the machine.
 Only use the machine if it is in perfect technical condition.
 A defective machine may only be repaired by an authorised
workshop. Do not repair the machine yourself.
 Do not make any changes to the machine, its components
or accessories.
 Always switch off the machine at the main switch before
carrying out maintenance work.
 Do not clean the machine with a water hose or high-
pressure cleaner.
2.2.2 Risk of burns and scalding
Escaping liquids and vapours can be very hot. Parts of the
machine also become very hot.
Observe the following safety instructions to avoid burns and
scalding:
 Avoid skin contact with escaping liquids and vapours.
 Do not touch any nozzles at the outlet during operation.