Transport, installation and commissioning
5.3.9 Calibrating the coffee grinder
Different roasts and varieties of coffee beans are ground
differently. Poor calibration can lead to poor coffee quality.
For the S-Variant Duo, carry out the same procedure for the
second mill.
Prerequisite
The grinding degree has been set appropriately ( "Setting
the grinding degree" on page 38).
Method
1. Unlock and open the automatic door with the key.
2. Pull out the cover plate to the front and clean it if necessary.
3. Press the white ring backwards at the water inlet of the
brewer and pull out the hose at the same time.
4. Remove the hose from the brewer at the top outlet.
5. To unlock the brewer, pull the locking lever on the bottom of
the brewer forward.
6. Lift the brewer up a little.
7. Remove the brewer from the front of the machine.
To Next Page
Loading...