EasyManua.ls Logo

Gerhardt S Series - Cleaning the Housing and Touchscreen; Complete Flush Program

Gerhardt S Series
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning and care
7.6 Cleaning the housing and touchscreen
The machine must be cleaned regularly and kept in a clean and
hygienic condition.
ATTENTION
Risk of material damage due to unsuitable cleaning
agents!
Abrasive cleaning agents can scratch the housing and
touchscreen.
Never use scouring cloths, sponges or cleaning agents.
Only use soft cleaning agents.
Method
1. To deactivate the touchscreen for 30 seconds, select
Cleaning > Clean touchscreen.
2. Clean the touchscreen with a glass or window cleaner and
a soft cloth.
3. Clean the machine from the outside with a soft, damp cloth
and, if necessary, a commercially available dishwasher
detergent.
7.7 Complete flush program
This program removes any residues with water from all
components. The program lasts approx. 1 minute and must not
be interrupted.
! CAUTION
Danger of scalding due to hot liquid!
During the program, hot rinsing water runs out of the
beverage outlet and can lead to scalding in the event of
contact.
Do not reach under the beverage outlet during the
program.

Table of Contents