Method
1. Clean the hose dispenser.
2. Clean the drip tray.
3. Clean the collection box.
Method
1. Insert collector box.
2. Insert drip tray.
3. Attach the hoses to the hose dispenser in the correct
positions.
4. ATTENTION! Danger of loss of function! The tubes of
chunky products (e.g. soups) must always be attached to a
spout without an injected plastic cross. An outlet with an
injected plastic cross serves as a foam diffuser (e.g. for milk
foam).
5. Residues of water can lead to product adhesions. Dry the
cleaned powder chute thoroughly.
6. Insert hose dispenser.
7. Close the automatic door and lock it with the key.
8. Running the “Complete flush” program ( “Complete flush
program” on page 53).
7.14 “Clean Brewer” program
With this program, residues and coffee oil residues are removed
from the brewer using a cleaning tablet. The program takes about
3 minutes and must not be interrupted.
Only use cleaning agents approved by the manufacturer to clean
the machine:
Cleaning tablets Gerhardt ESX Brewing group Part No.:
9003
Risk of burns and scalding!
Escaping liquids and vapours can be very hot. Parts of the
machine also become very hot.
Never reach in during the brewing process.
Cleaning the beverage outlet
Installing the beverage outlet
To Next Page
Loading...