Gerhardt S Series - Menu Structure

To Next Page

To Previous Page

Structure and function

4.3 Menu structure

Menu level 1

Menu level 2

Description

Cleaning

NOTE: The automatic rinsing and cleaning programs

do not replace manual cleaning of the components.

Complete rinse

Here you can automatically rinse the entire machine

with water.

Rinse MMX

Here you can automatically rinse individual trays with

water.

Clean valves

Here you can automatically clean the water valves of

the machine and remove any lime deposits.

Rinse brewer

Here you can automatically rinse the brewer with

water.

Cleaning the brewer

Here you can clean the brewer automatically using a

cleaning tablet.

Clean touch

Here you can hide the service menu for 30 seconds.

The touchscreen is functionless for this period.

During this time you can clean the touchscreen.

Lime filter

Here you can manage any existing limescale filter

and find out about its ageing condition.

The meter indicates how many litres the connected

filter can still filter.

The filter counter must be reset when the lime filter is

replaced. For the filter capacity, please refer to the

operating instructions of the filter manufacturer.

Clean brewer

with tablet

Here you can define the number of portions at which

the machine should prompt the user to perform a

tablet cleaning.