Transport, installation and commissioning
5.3.4 Filling the bean container
Danger of material damage!
Coffee beans treated with additives (e.g. sugar) and pre-
ground or freeze-dried coffee can damage the grinder.
If unsuitable types of coffee are used, the grinder may stick
together.
Only use roasted coffee beans of good quality without
post-treatment.
Do not use freeze-dried or caramelised coffee beans.
Do not pour coffee powder into the bean container.
Method
1. Unlock and open the automatic door with the key.
2. Remove the lid of the bean container.
3. Fill bean hopper according to requirements and available
capacity.
4. Place the lid on the bean container.
5. After filling with another type of coffee, the grinding degree
may have to be reset ( “Setting the grinding degree” on
page 38).
6. Close the automatic door and lock it with the key.
Method
1. Select Service menu > Counter readings > Filling levels .
2. Press [Filled?] to reset the counter of the filled bean
container.
Resetting the counter reading
To Next Page
Loading...