Gerhardt S Series - Rinse Brewer Program

Cleaning and care
56
Method
1. Unlock and open the automatic door with the key.
2. Empty drip tray and reinsert.
3. Select Service menu > Cleaning > Flush complete
system.
4. Follow the instructions on the touchscreen.
5. Close the automatic door and lock it with the key.
7.11 “Rinse brewer” program
This program removes coffee powder residues from the brewer
using water. The program lasts approx. 1 minute and must not be
interrupted.
Method
1. Unlock and open the automatic door with the key.
2. Empty drip tray and reinsert.
3. Select Service menu > Cleaning > Rinse brewer.
4. Follow the instructions on the touchscreen.
5. Close the automatic door and lock it with the key.