1-12
Getting Started
CAUTION: For optimal performance of the lithium battery, take note of the
following:
Use the included AC adapter only.
There is no need to fully discharge the battery before charging. You can
charge the battery before it is discharged.
Do not charge the battery where the temperature is high (e.g. in direct
sunlight).
As a protection against damage, your device stops charging when the
battery’s temperature is extremely high or low. In high temperature
conditions, the charging stops when the battery’s temperature gets
above 70°C (158°F) and continues when the temperature lowers to 60°C
(140°F). In low temperature conditions, the charging stops when the
temperature gets below -5°C (23°F) and continues when the
temperature rises to 0°C (32°F).
If you will not use the product for a long period of time, be sure to fully
charge the battery at least once every two weeks. Over discharge of the
battery can affect the charging performance.
Performing the Initial Startup
When turning on your device for the very first time, you will be guided
through a setup process.
1. Make sure that your device is either connected to AC power or the
battery has power.
2. Press the power button to turn on your device.
3. The setup screen appears. Follow the on-screen instructions to complete
the setup wizard.
4. After the setup is completed, the Home screen appears. You can now use
your device.
To Next Page
Loading...
Need help?
General