Getting Started 1-11
NOTE:
The battery cover must be locked for normal operation.
Your device supports battery hot swap. Whenever you remove the
battery cover with the device power on, the system will automatically
enter the suspend mode. As long as you replace the battery and battery
cover within180 seconds, you can press the power button to resume
operation. If the time exceeds 180 seconds, the system will automatically
shut down and any unsaved data might be lost.
Connecting to AC Power and Charging the
Battery
Be sure to fully charge the battery before using your device for the first time.
1. Fit the converter plug to the AC adapter (
).
2. Connect the DC jack end of the AC adapter to your device (
) and the
other end to a wall outlet (
).
3. The charge indicator glows in amber when charging is in progress. Do
not disconnect your device from AC power until the battery is fully
charged, as indicated by the amber indicator turning into green. This will
take a couple of hours.
To Next Page
Loading...
Need help?
General