Getting Started 1-15
Using Options
Using the Tether
NOTE: Attach the tether for the stylus to the device before attaching the
hand strap.
A tether is provided for attaching the stylus to your device.
1. Insert one of the tether’s loop ends through the hole of the stylus (as
indicated by below). Then, insert the other end through the first loop
(as indicated by below) and pull it tight.
2. Insert the other loop end to the holder on the device (as indicated by
below). Then, insert the stylus end through the loop (as indicated by
below) and pull it tight.
To Next Page
Loading...
