3-6
Managing Power
Replacing the Battery Pack
CAUTION:
There is danger of explosion if the battery is incorrectly replaced.
Replace the battery only with the computer manufacturer’s battery
packs. Discard used batteries according to the dealer’s instructions.
Do not attempt to disassemble the battery pack.
NOTE: You can hot swap one battery pack while the other one is supplying
the power.
To replace the battery pack, follow these steps:
1. Depending on which battery pack ( on the left side or on the right
side) you want to replace, open the respective cover.
Slide the cover latch toward the unlocked position ( ) (
) and then lift
up the tab (
) to release the cover.
(Battery 1 as the example)
2. Hold the battery latch and slide it toward the right to unlock.
(Battery 1 as the example)
To Next Page
Loading...
