Getac V200 - Page 88

5-10
Using BIOS Setup and System Recovery
Serial COM Port Configuration enables or disables the serial port. Press
Enter to access the submenu as shown below.
Advanced
COM PORT Configuration
Item Specific Help
Serial COM PORT1
Serial COM PORT2
Serial COM PORT3
[ ]
[Enabled]
[Enabled]
This option controls
the Onboard COM1
Address. When
enabled, COM1 uses
address 0x3F8h and
IRQ4.
F1 Help ↑↓ Select Item +/- Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select  Sub-Menu F10 Save and Exit
Enabled