Need help?Do you have a question about the GFA TS 970 and is the answer not in the manual?
General| Brand | GFA |
|---|---|
| Model | TS 970 |
| Category | Control Unit |
| Language | English |
Emphasizes that installation and commissioning should only be done by skilled and trained personnel.
Crucial instructions for installing the control unit indoors, on stable surfaces, and in a vertical position.
Illustrates the physical mounting process using elongated holes for secure attachment.
Highlights critical electrical safety warnings, including disconnecting power and using proper tools.
Provides specific guidance on the type of fuses and disconnectors required for on-site installation.
Guides through removing covers, opening entries, connecting cables, and tightening glands securely.
Warns against damaging components during installation and recommends using suitable tools.
Details different mains supply configurations (3-phase, single-phase) and their terminal connections.
Illustrates the process of connecting the mains power supply to the control unit.
Guides setting final limit positions for DES, covering rotation check, OPEN/CLOSE movement, and saving positions.
Guides setting final limit positions for NES, including rotation check and specific limit switch configurations.
Details wiring for external power supply and the connection of emergency stop devices.
Explains connections for automatic closing switches and general external control devices.
Details wiring for light curtains, radio receivers, and pull switches.
Guides through starting, selecting menu items, setting functions/positions, and exiting the programming mode.
Describes and allows configuration of different operating modes for the door.
Guides setting coarse and fine OPEN/CLOSE final limit positions for DES systems.
Details fine-tuning the pre-limit switch for safety edges in DES systems.
Details force monitoring, photo cell interruption, travel time monitoring, door safety switches, and reversing duration adjustments.
Details the functions, reactions, and types (NC/NO) of door safety switches.
Explains the automatic detection of different safety edges and important connection notes.
Guides the user on how to activate and safely use the emergency operation mode.
Details the connection and function of the emergency stop input, including specific notes for frequency inverter drives.
Details mains supply connections for the control unit and external devices, including voltage options and protection.
Details the force monitoring system for DES, its purpose, limitations, and important considerations.
Explains the travel time monitoring feature for NES, including fault indications and reset procedures.
Lists fault codes, descriptions, causes, and corrections for various operational issues encountered by the control.
To Next Page
