GFA TS 970 - DI;FI Settings

28
DI / FI s etti ngs
DI/FI settings
OPEN output speed
Output speed in rpm
CLOSE output speed
Output speed in rpm
Increased CLOSE output speed
Up to an opening height of 2.5 m
Output speed in rpm
0 = Off
Changeover position to CLOSE output speed
(with adherence to minimum opening height requirement of 2.5 m!)
Approach and store desired door position
OPEN acceleration
DI Steps of 1.0 seconds
FI Steps of 0.1 seconds
CLOSE acceleration
DI Steps of 1.0 seconds
FI Steps of 0.1 seconds
OPEN deceleration
DI Steps of 1.0 seconds
FI Steps of 0.1 seconds
CLOSE deceleration
DI Steps of 1.0 seconds
FI Steps of 0.1 seconds
OPEN/CLOSE crawling speed
Output speed in rpm