29
Maint ena nc e cy cl e co un ter
Maintenance cycle counter
Maintenance cycle preselection
01-99 corresponds to 1000-99000 cycles
cycles are counted down
Reaction upon reaching zero
Status indication "CS" appears in turns with value set by menu item 8.5.
Changeover to "hold-to-run" door operating mode. Status indication "CS"
appears in turns with value set by menu item 8.5.
Changeover to "hold-to-run" door operating mode. Status indication "CS"
appears in turns with value set by menu item 8.5.
Option: Press STOP-button for 3 seconds to deactivate changeover and
status indications for 500 cycles.
Status indication "CS" appears in turns with value set by menu item 8.5
and relay contact X20 switches.
To Next Page
Loading...
