57
13 D ecl ar ati on of I nc orp orati on /De cl ar atio n of C onf or mity
Declaration of Incorporation
pursuant to Machinery Directive 2006/42/EC for a partly
completed machine Appendix II Part B
Declaration of Conformity
pursuant to EMC Directive 2014/30/EU
We,
GfA ELEKTROMATEN GmbH & Co. KG
hereby declare that the product specified in the following complies with the above-mentioned EC
Directive and is only intended for installation in a door.
TS 970
Applied standards
DIN EN 12453
DIN EN 12978
DIN EN 60335-1
DIN EN 61000-6-2
DIN EN 61000-6-3
Doors – Safety in use of power operated doors
Safety devices for power operated gates and doors
Safety of electrical devices for the use in the household and similar
purposes– Part 1: General requirements
Electromagnetic compatibility (EMC) – Part 6-2 Generic standards –
Immunity for industrial environments
Electromagnetic compatibility (EMC) – Part 6-3 Generic standards –
Emission standard for residential, commercial and light-industrial
environments
On reasoned request, we undertake to submit the special documents for this partly completed
machine to the supervisory authorities.
Authorised representative for the compilation of the technical documentation
(EU address in the company)
Dipl.-Ing. Bernd Synowsky
Documentation representative
Partly completed machinery according to EC Directive 2006/42/EC is only intended to be installed
in, or combined with, other machinery (or other partly completed machinery/systems) to form a
completed machine pursuant to the Directive. Therefore, this product may be put into operation
only when it has been determined that the complete machine/system in which it has been installed
complies with the provisions of the above-mentioned directives.
Düsseldorf, 30.03.2016
Stephan Kleine
Managing Director Signature
To Previous Page
Loading...
