Safety functions
Safety functions
Force monitoring
0 = Off
Adjustable from 2 % to 10 % overload
Interruption to photo cell operation
Off
On
(teach in the same reference position twice)
Door safety switch function
(input X2.2 or WSD)
Slack-rope or pass-door switch
Crash detector (NC contact)
Hold-to-run after activation
Crash detector (NO contact)
Hold-to-run after activation
Crash detector (NC contact)
Reverse, reset in OPEN final limit position following contact reset,
otherwise hold-to-run
Crash detector (NO contact)
Reverse, reset in OPEN final limit position following contact reset,
otherwise hold-to-run
Automatic opening
(set automatic closing under menu 2.3)
0 = Off
0 to 99 minutes
Reversing duration adjustment
[ + ] slower
[ – ] faster
To Next Page
Loading...
