10 Functional description
X: 24 V DC voltage supply
Connection of external devices such as photo cell, radio receiver, relay, etc. via the 24 V and
GND terminals.
Attention – Damage to components!
Total current consumption of external devices: maximum 350 mA
X1: Mains supply line for control and external supply
Mains supply line for control
Connection via terminals X1/1.1 to X1/1.4 and PE.
Various mains connections: 3 N~ , 3~, 1 N~ for symmetric and asymmetric motors.
Note!
▶ Pay attention to the "Mains supply connection" and "Mains supply connection to
control" descriptions
External supply
Connection of external devices for 230 V, such as photo cell, radio receiver, relay, etc. via
terminals X1/1.8 and X1/1.9.
Note!
Mains supply: 3 N~400 V or 1 N~230 V, symmetric
Protection via F1, 1.6-A time-lag micro-fuse
To Next Page
Loading...
